Gearless Traction Machine Elevator parts Traction Ratio 2:1 Load 1000~2000kg
Remark:
1.Both hand-wind and hand-windless is available for this type of machine.
2.Remote releasing device is available for 1600kg machine, and the length of brake wire ranges from 4m to 10m.
3.Remote releasing device is not available for 2000kg machine.
| Traction Ratio | Load (kg) | Elevator Speed (m/s) | Rated speed (r/min) | Rated tarque (Nm) | Motor | Brake | Sheave |
Power
(KW) | Voltage
(V) | Current
(A) | Poles
(P) | Frequency
(Hz) | Current
(A) | Voltage
(V) | Brake torque
(N.m) | Diameter
(mm) | Rope
nxd | β angle | γ angle | Goover pitche
(mm) |
| 2:1 | 1250 | 1.0 | 85 | 919 | 8.2 | 340 | 18 | 16 | 22.7 | 2x1.15 | DC 110 | 2X1470 | 450 | 8xØ10 | 96° | 35° | 15 |
| 1.5 | 127 | 12.3 | 27.3 | 33.9 |
| 1.6 | 136 | 13.1 | 31.5 | 36.3 |
| 1.75 | 149 | 14.3 | 31.5 | 39.7 |
| 2 | 170 | 16.3 | 35 | 45.3 |
| 2.5 | 212 | 20.4 | 44 | 56.5 |
| 2:1 | 1350 | 1.0 | 85 | 992 | 8.8 | 340 | 19.5 | 16 | 22.7 | 2x1.15 | DC 110 | 2X1470 | 450 | 8xØ10 | 96° | 35° | 15 |
| 1.5 | 127 | 13.2 | 29.5 | 33.9 |
| 1.6 | 136 | 14.1 | 34 | 36.3 |
| 1.75 | 149 | 15.4 | 34 | 39.7 |
| 2 | 170 | 17.6 | 38 | 45.3 |
| 2.5 | 212 | 22.1 | 47.5 | 56.5 |
| 2:1 | 1600 | 1.0 | 85 | 1176 | 10.5 | 340 | 23 | 16 | 22.7 | 2x1.15 | DC 110 | 2X1470 | 450 | 8xØ10 | 96° | 35° | 15 |
| 1.5 | 127 | 15.7 | 34.5 | 33.9 |
| 1.6 | 136 | 16.7 | 39 | 36.3 |
| 1.75 | 149 | 18.3 | 39 | 39.7 |
| 2 | 170 | 20.9 | 44 | 45.3 |
| 2.5 | 212 | 26.1 | 55 | 56.5 |
| 2:1 | 2000 | 1.75 | 149 | 1470 | 22.9 | 340 | 48.5 | 16 | 39.7 | 2x1.15 | DC 110 | 2X1838 | 450 | 9xØ10 | 90° | 25° | 15 |
| 1 | 85 | 13.1 | 29.5 | 22.7 |
| 0.63 | 53.5 | 8.2 | 20.5 | 14.3 |
| 0.5 | 42.5 | 6.5 | 16 | 11.3 |
| 2:1 | 1000 | 3 | 208 | 898 | 19.6 | 340 | 41.5 | 16 | 55.5 | 2x1.15 | DC 110 | 2X1470 | 550 | 5xØ10 | 96° | 35° | 16 |
| 2:1 | 1150 | 1 | 69 | 1033 | 7.5 | 340 | 18.1 | 16 | 18.4 | 2x1.15 | DC 110 | 2X1470 | 550 | 6xØ10 | 96° | 35° | 16 |
| 1.75 | 122 | 13.2 | 28.9 | 32.5 |
| 3 | 208 | 22.5 | 48 | 55.5 |
| 2:1 | 1250 | 1 | 69 | 1123 | 8.2 | 340 | 18.6 | 16 | 18.4 | 2x1.15 | DC 110 | 2X1550 | 550 | 7xØ10 | 96° | 35° | 16 |
| 1.75 | 122 | 14.3 | 30.5 | 32.5 |
| 2.5 | 174 | 20.4 | 42.5 | 46.4 |
| 2:1 | 1350 | 1 | 69 | 1213 | 8.8 | 340 | 20.4 | 16 | 18.4 | 2x1.15 | DC 110 | 2X1550 | 550 | 7xØ10 | 96° | 35° | 16 |
| 1.75 | 122 | 15.4 | 33 | 32.5 |
| 2.5 | 174 | 22.1 | 46.2 | 46.4 |
| 2:1 | 1600 | 1 | 69 | 1437 | 10.5 | 340 | 23.1 | 16 | 18.4 | 2x1.15 | DC 110 | 2X1838 | 550 | 8xØ10 | 96° | 35° | 16 |
| 1.5 | 104 | 15.7 | 34.4 | 27.7 |
| 1.75 | 122 | 18.3 | 39.6 | 32.5 |
| 2.5 | 174 | 26.1 | 55.9 | 46.4 |
| 3 | 208 | 32.1 | 69.5 | 55.5 |
| | ≤1600kg(hand-wind) | ≤1600kg(hand-windless) | ≤2000kg(hand-wind) | D |
| A | 417 | 417 | 433 | 450 |
| B | 102.5 | 102.5 | 110.5 | 550 |
| C | 138 | 138 | 154 | |
| E | 183 | / | 183 | |
FAQ
1. Are the elevator wire ropes durable?
The elevator wire rope has special provisions and requirements. Configuration is not only for wire rope and rated load, but also considered the size of the traction, as a result, the tensile strength of wire rope is greater than the weight of the lift. The safety factor is equipped with more than four wire rope. So it won’t break at the same time.
2. Is it dangerous for power failure suddenly during the elevator running?
If it occurs, the elevator will automatically stop due to the electrical and mechanical safety device. In case of power failure,elevator brakes will automatically taken. In addition, the power supply departments such as planned outage, prior notice are also operating.
3. Will us be hurt when it closed suddenly?
In the closing process, if people touch the hall door, the door of elevator will automatically restart without any danger. With anti clamping switch, once the gate touched, this switching action make the elevator unable to be closed and even reopened. In addition, closing force is also available here.
4. How the elevator running?
Elevators are operated with a counterweight wire rope through the (tractor) traction drive, making ups and downs on the guide rail.
5. Is the escalator installation complicated?
We believe the functions of an escalator are not necessarily proportional to the operation complexity. Therefore, escalators designed by us apply an integrated structure, so that the equipment is more precise and more efficient and allows easier and more convenient commissioning.
6. Do you have any cerifications?
Yes, we do with ISO9001 / CCC / CE Certificates for u.
Product Tags:
|
|
Elevatorre Replacement Parts Gearless Traction Machine With Traction Ratio 2:1 Images
|
